F8L GT

Little update. Moving the iac to the bottom of the intake to clean up the engine bay a little. Once that is done, I will be sending the intake out to be ported. Sent from my AS985 using Tapatalk

2025

This one. After car is finished I'll be piecing together a HD/lightning blower swap

Thanks guys. Probably won't be done getting tuned until after the NMRA season. So until then, I've been messing with the other 2v

Can't wait to finish tuning it 2v Teksid first start: http://youtu.be/kTR7ABwlo6c

Has yet to run with this setup. Old setup was stock long block with bolt ons, 28x13.5 Hoosier QTP, 4.10 gears and 3200# and ran mid 12s

Looking good Jesse

Nye

I count 18

Have some little issues but it runs 2v Teksid first start: http://youtu.be/kTR7ABwlo6c

Started the car, had same issue as I had last fall when I started it which sounds like lash adjusters clanging. Pulled valve covers and started it, she's getting plenty of oil up top. With covers off it sounded like it might be deeper. So I grabbed the bore scope from my dad's shop and I'll pull the plugs and take a peak to see if the valves are hitting the pistons.

Booster is right there in front of your face [emoji14]

Got a little more to do and the wiring its finished.

Not really. Still working in extending wires. Had to order new cops since I stole them for my expedition