Jump to content

Recommended Posts

The actual color may vary from that which was depicted above but I’m shooting for essentially a dark grayish hue. Just want it to be all business underhood. 

Link to comment
Share on other sites

lwarrior1016 has been a busy MF lately!!

25626671048_6dd9a3a720_k.jpgEngine assembly by oldawgnewtrikz, on Flickr

24629659267_a26eac2370_k.jpgEngine Assembly by oldawgnewtrikz, on Flickr

27720210559_9205f780e7_k.jpgEngine Assembly by oldawgnewtrikz, on Flickr

38600496525_ce42daa110_k.jpgUntitled by oldawgnewtrikz, on Flickr

38789485194_bc308baa2f_k.jpgUntitled by oldawgnewtrikz, on Flickr

39535222451_2e4e574bb9_k.jpgClose! by oldawgnewtrikz, on Flickr

27758790569_0b6b58aad3_k.jpgClose! by oldawgnewtrikz, on Flickr

25664395248_ac1153b337_k.jpgClose! by oldawgnewtrikz, on Flickr

  • Like 2
Link to comment
Share on other sites

17 hours ago, RedTwilight said:

I'm so Angry Gelatin right now wishing my engine was even half this far along!

 

You don’t want the overtime hours associated with a fast engine build!! 

  • Like 1
Link to comment
Share on other sites

3 hours ago, White95 said:

 

You don’t want the overtime hours associated with a fast engine build!! 

 

I'm currently working 2 jobs and still don't have anywhere close to the fundage needed for even the basic parts for the rotating assembly.

  • Like 1
  • Sad 1
Link to comment
Share on other sites

3 hours ago, Lanter said:

What con rods are you using?  This project has really picked up the pace haha!

 

Boss 302/Coyote rods 

 

11 minutes ago, RedTwilight said:

 

I'm currently working 2 jobs and still don't have anywhere close to the fundage needed for even the basic parts for the rotating assembly.

 

I know the feeling 

  • Like 1
Link to comment
Share on other sites

The long block was assembled!! I’m waiting on a flywheel and some minor machine work before it can be dropped in.

 

Forward progress!!!

 

3V windage tray

 

Forward progress!!!

 

Forward progress!!!

 

Mach 1 oil filter/coolant doohickey 

 

Forward progress!!!

 

ARP2000 head studs 

 

Forward progress!!!

 

Fresh 2003 Cobra heads

 

Forward progress!!!

 

3V pickup tube and engine mounts 

 

Forward progress!!!

 

Boundary Division GT500/3V oil pump with billet gears

 

Forward progress!!!

 

Timing components installed

 

Forward progress!!!

 

MMR winged pan

 

Forward progress!!!

 

Sexy!!!

 

Forward progress!!!

 

Forward progress!!!

 

Looks good in the sunlight too!!

 

Progress halted

 

Progress halted

 

 

  • Like 5
Link to comment
Share on other sites

4 hours ago, ThomasW said:

Looking real nice!

 

im debating on dumping the 3v for a 4v setup myself. 

 

Just add a blower and you'll never know the difference.

Link to comment
Share on other sites

13 minutes ago, Musturd said:

Well then so much has changed . Holy mod motor swap and all 👌🏻

 

Yeah, trying to keep up with the times. I have an Eaton to throw at it once I have the bugs worked out and find a T-56 to swap in.

  • Like 1
Link to comment
Share on other sites

ummm if you don't buy them someone else on here probably will?  wait no, that's not helping you

 

or if you've already bought them, someone will easily take them off your hands i'm sure

Link to comment
Share on other sites

1 hour ago, Prokiller said:

ummm if you don't buy them someone else on here probably will?  wait no, that's not helping you

 

or if you've already bought them, someone will easily take them off your hands i'm sure

 

I'm going to put them in the attic until I sort out how to properly mount them and route the exhaust.

Link to comment
Share on other sites

7 hours ago, Evilcw311 said:

It’s very simple, L-brackets from the pinchwelds under the car go to the bottom of the covers. Top can either be mounted with 3m double sided tape or screw them down and use a nice capped screw. 

 

Routing the exhaust is easy as well. Use a straight through like slp or magnaflow and then you can just turn straight out to the tips. It’s more difficult if you try to use a chambered muffler due to size and placement of exits. 

 

Thank you for that, I was trying to imagine some sort of bracket setup and that cleared it up.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


SN95 Source ©

The premier SN95 Community

×
×
  • Create New...