F8L GT Posted December 31, 2013 Report Share Posted December 31, 2013 Last winter I started making the pattern for a new radio delete Then time went by and the idea fizzled away. Well, now I dug out the pattern and going to finish the delete Just need to do a little more trimming, then I can start the bezel portion Sent from my HTC One using Tapatalk Link to comment Share on other sites More sharing options...
iRoush Posted December 31, 2013 Report Share Posted December 31, 2013 looks good bud! i went a little more for the factory look on mine just because I need to stay class legal, but that idea definitely crossed my mind! Link to comment Share on other sites More sharing options...
ttocs Posted December 31, 2013 Report Share Posted December 31, 2013 Use tape to make the lower portion. Lay out masking tape L-R and then top-bottom and then you can use a knife to cut out the area you want to transfer that to what ever you want to cover it. Link to comment Share on other sites More sharing options...
F8L GT Posted December 31, 2013 Author Report Share Posted December 31, 2013 I use light weight cardboard like poster board to make all the patterns. The same way we make the patterns for interiors of drag cars. Also the same way I made my rear seat delete that Det_Riot wants so bad Sent from my HTC One using Tapatalk Link to comment Share on other sites More sharing options...
Det_Riot Posted December 31, 2013 Report Share Posted December 31, 2013 Don't think I forgot about those @F8L GT! I'm still down for one if you wanna make me one =] Link to comment Share on other sites More sharing options...
ttocs Posted December 31, 2013 Report Share Posted December 31, 2013 I too use cardboard but on something like the shifter bezel with its curved surface I would think the tape would be faster. Link to comment Share on other sites More sharing options...
F8L GT Posted December 31, 2013 Author Report Share Posted December 31, 2013 I may have to try it depending on how things go. Gotta wait for it to warn back up a little before I work on it again Sent from my HTC One using Tapatalk Link to comment Share on other sites More sharing options...
F8L GT Posted October 21, 2014 Author Report Share Posted October 21, 2014 Been a while since I updated this thread but here's the where it sits now. The wideband is out in one of the pics for tuning another car Link to comment Share on other sites More sharing options...
ttocs Posted October 21, 2014 Report Share Posted October 21, 2014 all kinds of room for gauges/switches/crap. Did you say you were going to do something to the bottom bezel? Link to comment Share on other sites More sharing options...
Tony Posted October 21, 2014 Report Share Posted October 21, 2014 nice job man. so did that steering wheel bolt right up or was there some kind of hub adapter? Link to comment Share on other sites More sharing options...
F8L GT Posted October 21, 2014 Author Report Share Posted October 21, 2014 all kinds of room for gauges/switches/crap. Did you say you were going to do something to the bottom bezel?Originally was going to make the shifter bezel part of the delete but decided not to. I just made the angle at the bottom of the panel match the angle of the bezel.nice job man. so did that steering wheel bolt right up or was there some kind of hub adapter?I used a mounting kit fox body Link to comment Share on other sites More sharing options...
ttocs Posted October 21, 2014 Report Share Posted October 21, 2014 I was wondering how you were going to integrate the bottom. Looks like it would be a challenge for sure. Link to comment Share on other sites More sharing options...
F8L GT Posted October 22, 2014 Author Report Share Posted October 22, 2014 I was wondering how you were going to integrate the bottom. Looks like it would be a challenge for sure. we have a vacuum form at work. I would just have to make a mold for it. The more I thought about it, the better it was to just use the stock bezel Link to comment Share on other sites More sharing options...
Moderators Psychorugby Posted October 22, 2014 Moderators Report Share Posted October 22, 2014 we have a vacuum form at work. I would just have to make a mold for it. The more I thought about it, the better it was to just use the stock bezel Vacuum form you say... big enough for a trunk lid lol?? Link to comment Share on other sites More sharing options...
F8L GT Posted October 22, 2014 Author Report Share Posted October 22, 2014 Vacuum form you say... big enough for a trunk lid lol??Not that big Link to comment Share on other sites More sharing options...
