Jump to content
Prokiller

March ROTM Voting Thread

March ROTM  

27 members have voted

  1. 1. Who is our besssst ssssnake?

    • Steve-oh
      11
    • Haterbuilt
      1
    • Rolocut
      12
    • NVRL8TE
      3


Recommended Posts

sssince thissss month issss about ssssnakessss of the Ford SSSSVT nature, the beloved Cobra.  So you can only guessssss at how thisssss ssssshould be read, with a whole lot of touch hissssssing.  unlessss you have a lissssp, then it would would be more like thith.  We here at SSSN95SSSSource have no prejudice againsssst anyone with a sssspeech impediment.   And jusssst becausssse it'ssss funny in my head to have everyone try and sssay thissss: SSSally sssellssss ssseasssshellssss down by the sssseasssshore. 

 

I guessssss I've had enough fun....for now.

 

 

Steve-oh

Performance:
 

  • Ford Racing 427W crate motor
  • 4.125 bore / 4.00 stroke
  • SCAT forged crank & I-beam rods
  • Forged Mahle pistons 10.5:1
  • Hydra roller cam .576/.600 ; 242/248
  • FRPP Aluminum “Z” heads 2.02 intake / 1.60 exhaust
  • Ford EFI distributor, MSD cap/rotor
  • Edlebrock Victor upper/lower
  • BBK 75MM throttle body
  • C&L intake tube
  • FRPP 90MM L-MAF
  • MSD 6A box
  • Aeromotive rails, braided lines from firewall, FRPP 47lb'ers and a 255 Walbro
  • BBK shorties, rigged up off-road “h”, Flowmaster exhaust
  • FRPP 4.10 gears
  • ...and a basically stock T-5 Transmission!
  • Tuning by Keith Varin (The Mk2)


Suspension:
 

  • Maximum Motorsports K-member, A-arms, rear lower adj. control arms, front coilover kit & CC plates
  • Blistein front struts with Hypercoils & Bilstein rear shocks with H&R Supersports
  • Steeda full length subframe connectors
  • Steeda bump steer


Exterior:
 

  • H.O. Fibertrends 3.5” Cobra R hood
  • Export rear tailights
  • DEPO projector headlights (matching sidemarkers) de-chromed and painted black
  • “Poxenham” front tow hook


Interior:
 

  • Pioneer AVIC double din swap
  • Autometer Lunar gauges
  • Push button start (inactive)
  • Crappy factory seats
  • SVT rear seat delete / sub & amp mount (made by yours truly)


Wheels / Tires:
 

  • GT500 replicas: 18x9 front /18x10 rear
  • Pirelli P-Zero Rosso's: 265/35 front ; 315/30 rear

9595385765_9f71ec3024_b.jpg

9595383439_64e364428e_b.jpg

9597836721_6be998d419_b.jpg

 

 

 

Haterbuilt

-Performance:

Mac long tube headers

Lethal Performance offroad x pipe

Bassani polished catback

JLT ram air intake

PCV delete and EGR delete

Maximum Motorsports oil filter relocation

-Suspension:

Maximum Motorsports caster camber plates

Maximum Motorsports coil over kit

Maximum Motorsports sway bar bushings

Maximum Motorsports hellion k member

Maximum Motorsports lower control arms

Maximum Motorsports solid steering rack bushings

Maximum Motorsports bump steer kit

BIlletflow IRS brace

One coil cut on rear springs
-Exterior:

Hood vent delete

Smoked headlights

8" antenna

Flat black trunk panel

Flat black bumper inserts
-Interior:

Hydrodipped skull themed door inserts
-Wheels/Tires:

HRE 540 flat black centers/gloss black lips 18x8.5 and 18x10.5 aggresive offset

NItto NT555 245/40/18 and NT555R 305/35/18

 

side2.jpg
unnamedk.jpg
20140223_172821.jpg

 

 

Rolocut

Engine:

352 R 302 Block With Billet Internals and Forged Pistons 10.3-1

Solid Roller Custom Cam .700 lift 112 lobe seperation

Trick Flow R225 CNC Heads Port Matched larger to intake

Inconel Exhaust Valves

Ported With Custom EFI Converted Parker Funnel Web Intake, Shaved and Polished

Vortech V7 YS Supercharger

KRC Power Steering Pump With Custom CNC bracket

Custom Intercooler Piping and Elbow Holley HP EFI System

Built By Tony At Dynamic 4R70W With Manual Valve Body Automatic Transmission

Kooks Ceramic Custom Headers with Custom 3 Inch exhaust

A1000 Fuel Pump with -10 Feed and Return

120lb Holley Injectors

Holley HP Efi

Kurgan Strut Brace

2.95/8 Inch Pulley Set up Should be 21-24lbs

AEM Meth kit

 

Wheels:

Enkei NT03+m 18x9.5 Front &18x10.5 Rear

Nitto 555R 305/35R18 Rear

BFG KDW 255/40R18 Front

 

Brakes & Suspension:

Maximium Motorsports Coilovers Front 10/350

UPR Pro Series Rear Coil over 12/175

Team Z Rear Control Arms

Team Z Anti Roll Bar

Built 8.8 with 31 Spline Moser Axles and Eaton Diff

10th Anniversary Cobra Calipers Front and Rear

UPR Chromoly K-Member and A-arms

Motor Set 1in Back

Custom Hydroboost Set Up with An Lines and Fittings

03 cobra rack max motorsports solid shaft and solid bushings with upr bump steer kit

 

Body:

Shaved and Smoothed Engine Bay

Smoothed Rear Bumper

4.5 Inch Kaenan Cobra RR Hood

Boss Shinoda Rear Spoiler

Wolfe Racecraft 6 Point Roll Bar With Through Floor Subframe Connectors

Scott Rod Fab Engine Bay Patch Panels and Rear Seat Delete

Fenders Rolled in All 4 Corners

Bottom Of car Painted Red

Wheel Wells Painted and Undercoated Black

Swade 2 Tone Corbeau with home made Seat Brackets

Corbeau 5 Point Harnesses with Custom 5th Harness Mount

 

msg-385-0-27876300-1393338143_thumb.jpg

by2y3eze.jpgu2a9ypam.jpg

 

 

 

NVRL8TE

T56 swap
4.56 gears, rebuilt rear
some Team Z suspension, Strange shocks
Custom off road x pipe, Borla stingers, stock manifolds.
Stock engine, airbox to manifolds, intake to TB.
Corbeau A4 seats, rear seat delete
stock exterior
billet specialties 15x10/15x3.5 275/50 ET streets, 165/80 fronts
best et of 12.39 @ 108
dynos 300 RWHP
weighs 3200 flat without me in it.

 

5C3E927A-D1D7-43C8-8A6B-F9AB9161D444-290


DF907514-0DCF-4533-8B3E-3FE52553165F-175

6373f614.jpg

 

 

 

Let the best SSSSnake win!!

Link to comment
Share on other sites

Yea we screwed ourselves this month, I'm gonna have to think on this and vote tomorrow or something. I love all 4 cars posted (thankfully both of Billy's cobras aren't in it, I'd never be able to decide...)

Link to comment
Share on other sites

I've brought that up so many times...I guess the one minute or less it takes to read about the contestants then click to vote is too much, lol. Pretty ridiculous.

And @Prokiller is the voting time frame usually 3 days? Seems pretty short.

Link to comment
Share on other sites

I've brought that up so many times...I guess the one minute or less it takes to read about the contestants then click to vote is too much, lol. Pretty ridiculous.

And @Prokiller is the voting time frame usually 3 days? Seems pretty short.

I would say two weeks if doing it mid month. No need to announce till day before month end imo

On going project, 94 cobra, r block, tfsr225, hp efi, vortech ys

Instagram @rolocut

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

I've brought that up so many times...I guess the one minute or less it takes to read about the contestants then click to vote is too much, lol. Pretty ridiculous.

And @Prokiller is the voting time frame usually 3 days? Seems pretty short.

I'm trying to get back on track with having the voting end on the last day of the month so as to announce the winner on the 1st.  this being the shortest month of the year, it has put a damper on the timeframe for voting.  also me being away didn't help me kick off the nomination thread.  We can go an extra day or two if you guys think it will be worth it.

Link to comment
Share on other sites

It couldn't hurt to wait a few extra days. Sunday night maybe?

On going project, 94 cobra, r block, tfsr225, hp efi, vortech ys

Instagram @rolocut

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Killer cars but I had to vote for my boy @Rolocut ... His cars exactly where I want mine to be rotisserie painted ,shaved bay and well damn that motor with the solid roller cam and ysi is straight sex appeal to me .

Link to comment
Share on other sites

Lol it's sad how no one votes or goes on when we have over 400 members

On going project, 94 cobra, r block, tfsr225, hp efi, vortech ys

Instagram @Rolocut

Sent from my iPhone using Tapatalk

Out of those 400 members Ill bet less than 100 are actually active and that's the problem. Anyway I voted when the poll first popped up just didn't feel the need to say I voted lol. But since were on the topic had to go with you Rolocut... shouldn't even be close. No offense to the others but there just not in your league yet. Good luck, love the work you did on that car

Link to comment
Share on other sites

Out of those 400 members Ill bet less than 100 are actually active and that's the problem. Anyway I voted when the poll first popped up just didn't feel the need to say I voted lol. But since were on the topic had to go with you Rolocut... shouldn't even be close. No offense to the others but there just not in your league yet. Good luck, love the work you did on that car

Thank you, Cant say i dont agree lol

Link to comment
Share on other sites

Rolocuts car is on a whole other level then everyone's and people have a hard time stomaching it lol

Thanks Brother! Your car will be here soon! Pics from today at the 55th frank Marattas auto show a8y2yzy4.jpgenehetuh.jpghe5y2e7u.jpgnybe6y9e.jpg7ebybede.jpg

On going project, 94 cobra, r block, tfsr225, hp efi, vortech ys

Instagram @rolocut

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


SN95 Source ©

The premier SN95 Community

×
×
  • Create New...