smallblocksn95 Posted June 22, 2014 Report Share Posted June 22, 2014 I'm putting my front suspension back together and maximum says to refer to your coil over instructions for how to set their spacers. My coil overs don't have real instructions. Anyone have an idea? 1 large underneath the plates and the other large and 2 smalls above the bearing? Link to comment Share on other sites More sharing options...
Steve-Oh Posted June 22, 2014 Report Share Posted June 22, 2014 I think most of the install directions for coilovers are going to be relatively the same depending on design and whatnot. I would think though the spacer setup would be similar. Here's MM's coil-over install instructions. They talk about spacers towards the end of page 8 and continuing on page 9: http://www.maximummotorsports.com/Assets/install/pdf/front_susp/MMCO-1r3.pdf Link to comment Share on other sites More sharing options...
smallblocksn95 Posted June 23, 2014 Author Report Share Posted June 23, 2014 Thanks Steve, I'll check it out. Right now I've got one large above and 1large underneath. I tried it with a small and large up top but it didn't give me many threads on the strut nut. Link to comment Share on other sites More sharing options...
