kucklehead Posted October 8, 2012 Report Share Posted October 8, 2012 Will a 99-04 cobra h or x pipe bolt up to my 5.0? I doubt it but I want to make sure. Going with an irs that picked up over the weekend and looking at exhausts.Sent from a Bionic powerhouse Link to comment Share on other sites More sharing options...
SVT Rob Posted October 8, 2012 Report Share Posted October 8, 2012 I don't think the crossover pipe will work on your 5.0, but the IRS cat-back should just bolt right into place on your 94-95 crossover pipe. Link to comment Share on other sites More sharing options...
kucklehead Posted October 8, 2012 Author Report Share Posted October 8, 2012 That's what I thoughtSent from a Bionic powerhouse Link to comment Share on other sites More sharing options...
Ivan Posted October 8, 2012 Report Share Posted October 8, 2012 I think it can work with some modifications. One of the flanges that connects to the headers is flat and not a ball type like the pre 96s Link to comment Share on other sites More sharing options...
OnyxCobra Posted October 8, 2012 Report Share Posted October 8, 2012 if you do use the 99-04 pipe you'll have to plug the rear 02 sensor holes as well. I don't see it bolting up at all though without modding it, like Ivan was saying the different header connectors is so stupid; just saw it on my friend's 97 GT this past weekend and was like wtf is that?? Link to comment Share on other sites More sharing options...
01yellercobra Posted October 8, 2012 Report Share Posted October 8, 2012 The width of the motors is different as well. Just get an IRS catback and you'll be fine.Misspelling brought to you by Tapatalk Link to comment Share on other sites More sharing options...
scottydsntknow Posted December 29, 2012 Report Share Posted December 29, 2012 Get the correct midpipe, the 99-04 ones have a square flange on the passenger's side. And yeah you'll need an IRS catback or just run sidepipes. I kind of like the sidepipe look on SN95s actually... Link to comment Share on other sites More sharing options...
