eskyseal281 Posted June 17, 2014 Report Share Posted June 17, 2014 hello everyone. Gots me a question. I have a 96 GT that was missing the stut tower brace. a friend gave me a brace from his 95 Cobra. looks like this might work, a little tight on the factory air intake tube, but the problem is the bolts. I am running Maximum Motorsports caster camber plates. when i try to install the bolt the factory washers on the bolts are too wide and hit the cc plates. does anyone know the bolt size or what i should do? really want to run the brace.thanks for any help! Link to comment Share on other sites More sharing options...
stang232 Posted June 17, 2014 Report Share Posted June 17, 2014 Last week I installed the BBK cc plates.Also, I had a problem, so I modified the strut tower brace.I have yet to smooth out and paint,now it looks like in the picture below Link to comment Share on other sites More sharing options...
Blackmage Posted June 17, 2014 Report Share Posted June 17, 2014 i would just grind down the washer to fit Link to comment Share on other sites More sharing options...
Sleeperstang1994 Posted June 20, 2014 Report Share Posted June 20, 2014 Take your bolt to the local hardware stir and match it up with the same size bolt. Add smaller sized washed. Boom Link to comment Share on other sites More sharing options...
Steve-Oh Posted June 21, 2014 Report Share Posted June 21, 2014 ^ both great solutions.Sent from Space Link to comment Share on other sites More sharing options...
