Kyle5.0 Posted June 10, 2017 Report Share Posted June 10, 2017 Couldnt find much info online about this so I decided to put together a little how to in case anyone else is looking to do this. The process is pretty simple and takes maybe 10-15 minutes. I picked mine up at CJ Pony parts: http://www.cjponyparts.com/antenna-delete-plate-black-plastic-cobra-r-style-1994-2004/p/HW3715/?year=2001&gclid=CjwKEAjwse7JBRCJ576SqoD7lCkSJABF-bKu8WYFBH2OqKCjpZDNawneflHNa4f43PeZ1PAwXTTZGhoC_Jnw_wcB Before: DSC_0477 by Kyle Matson, on Flickr Unscrew antenna from base DSC_0479 by Kyle Matson, on Flickr Use a flathead screw driver to pry up on the bezel. Place a towel underneath the screw driver to prevent scratching the fender. Work your way around the bezel gently prying up. I ended up having to break mine to get it off. DSC_0480 by Kyle Matson, on Flickr Remove 3 phillip screws that attach antenna to fender DSC_0482 by Kyle Matson, on Flickr Fold down glove box by pressing in on each side and pull out DSC_0483 by Kyle Matson, on Flickr Locate and disconnect orange antenna wire DSC_0485 by Kyle Matson, on Flickr Pull entine antenna assembly out from top DSC_0486 by Kyle Matson, on Flickr Remove backside of tape on the delete plate and place over hole DSC_0489 by Kyle Matson, on Flickr Link to comment Share on other sites More sharing options...
Blackmage Posted June 14, 2017 Report Share Posted June 14, 2017 those three little screws were a BITCH on mine lol Link to comment Share on other sites More sharing options...
