Blackmage Posted December 26, 2018 Report Share Posted December 26, 2018 Anyone have any recommendations on what I should upgrade while im tearing down my t45 for synchro replacement? I was thinking about doing the bronze shift fork pads and also the billet keys for the hub assemblies. But what else, if anyhting, should i upgrade. Probably going to do all synchros, and probably input and output shaft bearings just because. Link to comment Share on other sites More sharing options...
Blackmage Posted February 2, 2019 Author Report Share Posted February 2, 2019 going to be replacing all synchros with carbon fiber rings, billet shift forks, bronze fork pads, all seals, and billet keys for the synchro hubs. Ill look at bearings when im in there to see if anything is binding. otherwise thats about all ill be doing Link to comment Share on other sites More sharing options...
Moderators LWARRIOR1016 Posted February 2, 2019 Moderators Report Share Posted February 2, 2019 Sounds like you’ve got a pretty good handle on it. Take pictures for us. Link to comment Share on other sites More sharing options...
