Jump to content
the.greg

May 2013 ROTM- iRoush

Recommended Posts

Congratulations to our May ROTM Winner: iRoush

Awesome, one of a kind Roush!

DSC_0252.jpg

DSC_0281.jpg

860135_413109682111722_948604865_o.jpg

_MG_5494.jpg

Mod List:

MMR 600 Short Block

-Flat Top Manley Pistons (13.7:1 Compression after head/block decking)

-MMR I-Beam Rods

-Ford Cast Crank

-1998 Teksid Aluminum Block

-Decked .030 Over

-Dynamically Balanced Rotating Assembly

-MMR Windage Tray

MHS Stage 3 Ported Heads

-Decked .030 Over

-Oversized Stainless Valves

-Timeserted Spark Plug Threads

-Stage 3 Valve Springs

MHS Stage 4.5 Bullet Cams

-Degreed for Max Power

-245/243 Duration

-108 Lobe Separation Angle

-550/540 Lift

- Ford GT Camshaft Followers

- OEM Lash Adjusters

Steeda Underdrive Pullies

Accufab Plenum

Roush 75mm Throttle Body

JLT Ram Air Intake

Port Matched OEM Intake Manifold

MMR-Moroso Oil/Air Separator

EGR Delete

PCV Delete

Moroso Coolant Overflow

Odyssey PC-680 Battery w/ aluminum mount

FRPP 42# Injectors

90mm Lightning MAF

2004 Terminator Fuel Tank w/ Pumps

Mac Longtube Headers

Mac O/R H-Pipe

Dynomax Super Turbo Side Exit Exhaust

Fidanza Aluminum Flywheel

Exedy Mach 500 Clutch

Steeda Firewall Adjuster

Steeda Adjustable Clutch Cable

Steeda Quick Release Quadrant

FRPP Aluminum Driveshaft

FRPP 3.73 Gears

Chassis:

Roush-Bilstein Shocks & Struts

Maximum Motorsports Front Coilovers (300# Springs)

Maximum Motorsports C/C Plates

Custom Front End Alignment for Autocross

Maximum Motorsports Bumpsteer Kit (Cycled Bumpsteer out)

Maximum Motorsports 4-Point Roll Bar

Roush Subframe Connectors (Welded In and tied to roll bar)

Roush Rear Springs (No Isolators)

Roush Tubular Rear Lower Control Arms

Roush Rear Sway Bar

Roush Pinion Snubber

Roush-PBR 13" Front Brake Caliper Kit

Raybestos R-300 Brake Rotors

Porterfield R4-S Brake Pads

Speed Bleeder Kit

Interior:

Corbeau Style Reclining Race Seats w/ custom seat mounts

G-Force 6-Point Harness

Roush Gauge Cluster with custom mounted Autometer Oil Pressure Gauge in

Cluster

Home Made Progressive Shift Light

Florida 5.0 Radio Delete Panels

Home Made HVAC Delete Panel w/ AFR Gauge Mount

Home Made Passenger Airbag Delete

MOMO Steering Hub

NRG Quick Release v2.0

OMP od/1990/nn Steering Wheel

PLX DM-5 Wideband Gauge

Roush Short Throw Shifter

Gutted Dash, Doors, and Trunk

Removed Sound Deadening, insulation, etc.

Exterior:

Roush Stage 3 Front Bumper

Roush-Yates (Penske) COT Tegris Front Splitter w/ Custom Fabricated Dive

Planes

Longacre Splitter Rods

Steeda Q400 Hood

Moroso Hoods Pins

Roush Side Skirts

Roush Rear Valances

Roush Side Exit Exhaust System

Roush-Yates (Crawford Composites) COT Carbon Fiber Wing

Agent 47 Vortex Generators

Wicked Motorsports Rear Diffuser

Smoked Headlight Covers

HIDmasters 6000k Hid Headlight/Foglight Kit

Mirrored Finish Radiator Panel

Roush 18x9 Argent Wheels

-265/35/18 Sumitomo HTR-Zii Tires (Front)

-285/35/18 Sumitomo HTR-Zii Tires (Rear)

Link to comment
Share on other sites

Whooooot good job Bert! Too bad your car cant stay together for more than 3 days!!!

no kiddin but progression is the only way to keep me interested in it haha. thanks everyone!

Link to comment
Share on other sites

Shoop da whoop! Congrats Brett, well deserved! Attention from 5.0 mag and ROTM, not a bad month for the cone dodger :thumb:

haha, thanks man! the 5.0 mag attention wouldn't have happened without your help though!

Link to comment
Share on other sites

I love Dan for helping me get this going:

"Hey Brett, what's your phone number? There's a possibility we'll be doing a feature on your car, that's why I need your digits.

Thank you.

Michael Johnson

Associate Editor

5.0 Mustang and Super Fords"

Link to comment
Share on other sites

I love Dan for helping me get this going:

"Hey Brett, what's your phone number? There's a possibility we'll be doing a feature on your car, that's why I need your digits.

Thank you.

Michael Johnson

Associate Editor

5.0 Mustang and Super Fords"

Oh let me text Mike and tell him it should be a definite not a possibility.

Link to comment
Share on other sites

Oh let me text Mike and tell him it should be a definite not a possibility.

While you're at it, I happen to know he's the proud owner of the Coyote-powered 95, so tell him he should join the forum, lol.

Haha yea right, that dude has to be one of the busiest men on earth, I doubt he hits up any forums.

Link to comment
Share on other sites

While you're at it, I happen to know he's the proud owner of the Coyote-powered 95, so tell him he should join the forum, lol.

Haha yea right, that dude has to be one of the busiest men on earth, I doubt he hits up any forums.

he actually owns a Bullitt now lol I will have to say something to him though.
Link to comment
Share on other sites

They should re-shoot your car with the painted splitter also :thumb:

And make them hook you up with rolling shot hotness.

I'm sure they will haha. if its a feature there's gonna be a good number of pics lol

Link to comment
Share on other sites

you guys should sponsor my car and build me a custom set of racing seats :whisper: guaranteed those seats would sell :P

Let's pretend that at the show I didn't bring up the seat idea to you and you said

" NO BECAUSE RACECAR"

Lol jk

Link to comment
Share on other sites

Let's pretend that at the show I didn't bring up the seat idea to you and you said

" NO BECAUSE RACECAR"

Lol jk

haha when I say build me a seat I mean I need huge side bolsters and bucket to hold me in lol, the sport seats are too loose even with my 6-point harness.

Like this but with maybe less head bolster:

Sparco%2520Circuit__35299_zoom.jpg

Link to comment
Share on other sites

That thing in the middle crotch area scares me if you hit a bump too hard and come back down.

When our new seat comes out, I'll measure the bolsters.. It's not THAT aggressive, but I loved the feel of it.

I'll take you for a ride at my next auto-x June 1st. you'll see why I need a huge bolster lol.

as for the middle crotch area if you're nuts are hanging that far off the seat I think you have bigger issues lol

Link to comment
Share on other sites

I can probably get in talks about opening up to more options because of all that. Thinking more aggressive bolsters in our Sport X that will be coming out eventually.

Text me with details of the Auto X, and price

well you know you have my car to test fit on so if you look to expand to a racing style seat I'm more than willing to let you guys test fit seats.

Link to comment
Share on other sites

Like Steve knows, don't expect squat until the end of the year haha.

We are so crazy backed up and releasing so many products this year it's unbelievable. Next year will be nuts also and thats when I'm thinking for you.

I got plenty of time. I'm only 22 :D lol

Link to comment
Share on other sites

like steve knows, don't expect squat until the end of the year haha.

We are so crazy backed up and releasing so many products this year it's unbelievable. Next year will be nuts also and thats when i'm thinking for you.

truth
Link to comment
Share on other sites

"Instead of hunting down every other car to defeat, the Bullitt is so slow I have been relegated to driving like a responsible member of society."

I love the humor he throws into his articles :thumb:

Link to comment
Share on other sites

"Instead of hunting down every other car to defeat, the Bullitt is so slow I have been relegated to driving like a responsible member of society."

I love the humor he throws into his articles :thumb:

lol this goes back to my comment earlier about losing interest.
Link to comment
Share on other sites

Now to get back on topic...Congrats Brett! You have dedicated your ride to a goal and have achieved it. Now...start on another project.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


SN95 Source ©

The premier SN95 Community

×
×
  • Create New...