iRoush Posted July 17, 2012 Report Share Posted July 17, 2012 (edited) Decided to start a thread on the sound of cammed 2v's, because I mean, who doesn't like the sound of a cammed mustang amirite? Post up an idle vid (and add in some revs if you want to). and list your mods (TELL US WHAT CAMS FIRST)!I'll start us off:MHS Stage 4.5 Cams MMR 600 shortblock-’98 teksid aluminum block-13.7:1 compression ratio-Flat top pistons w/ notches-MMR windage trayMHS stage 3 ported heads-Decked .030 overMHS stage 4.5 bullet cams-245/243 duration-108 lobe seperation angle-550/540 lift-Ford gt camshaft followersSteeda underdrive pulliesAccufab plenumRoush 75mm throttle bodyJLT ram air intakeFRPP 42# injectorsLightning mafKMS torker 340lph fuel pumpMac longtube headersMac o/r h-pipeDynomax super turbo side exit exhaustFidanza aluminum flywheelSpec stage 2 clutchFRPP aluminum driveshaftFRPP 3.73 gearsTuned for ethanol (e85) Edited May 19, 2013 by iRoush Link to comment Share on other sites More sharing options...
330CubeGt Posted July 18, 2012 Report Share Posted July 18, 2012 Car sounds like a beast! Link to comment Share on other sites More sharing options...
Schiffy Posted January 26, 2013 Report Share Posted January 26, 2013 Why does it say that the video's don't exist, I wanted to hear some camp 2V... See if I was going to be able to get into this modular stang deal. Link to comment Share on other sites More sharing options...
fry Posted February 10, 2013 Report Share Posted February 10, 2013 What a tease. Videos don't work. ): Link to comment Share on other sites More sharing options...
Schiffy Posted February 10, 2013 Report Share Posted February 10, 2013 What a tease. Videos don't work. ):I know right! I know what cammed 5.0s and 5.8s sound like. Lets hear some 2v!!! Link to comment Share on other sites More sharing options...
iRoush Posted February 10, 2013 Author Report Share Posted February 10, 2013 Fixed. Had to delete the second vid, I got rid of that youtube account in favor of my BTM AutoSport page. Link to comment Share on other sites More sharing options...
Solar Posted February 10, 2013 Report Share Posted February 10, 2013 2vs suck Link to comment Share on other sites More sharing options...
fry Posted February 10, 2013 Report Share Posted February 10, 2013 Fixed. Had to delete the second vid, I got rid of that youtube account in favor of my BTM AutoSport page.That's more like it! I drove built up 01 bullitt the other day and it had the same rumpity rump rump sound haha. Link to comment Share on other sites More sharing options...
Luis@OrtizPerformance Posted March 17, 2013 Report Share Posted March 17, 2013 We had a customer come in, buy some cams we had, and install it as well. Here are the results. CAIFlow Tech ExhaustPaceSetter LTsLCR Stage 2.5 CamsOrtiz Tune Link to comment Share on other sites More sharing options...
Schiffy Posted March 17, 2013 Report Share Posted March 17, 2013 Love that idle! That's what I'm looking for... Of course, performance matters to. lol Link to comment Share on other sites More sharing options...
Luis@OrtizPerformance Posted May 19, 2013 Report Share Posted May 19, 2013 (edited) Our OPS1 Camshttp://www.youtube.com/watch?v=aj-ZEbLgSeQOPS1 CamsK&N intakeO/R x pipeSLP LM1 mufflersOrtiz 93 Tune Edited May 19, 2013 by Luis@OrtizPerformance Link to comment Share on other sites More sharing options...
Schiffy Posted May 19, 2013 Report Share Posted May 19, 2013 As soon as I can get some coin together, you'll have a '98 PI swapped GT rocking the cams to!Sent from my secretary!!! Link to comment Share on other sites More sharing options...
PapaSmurf Posted May 19, 2013 Report Share Posted May 19, 2013 Saw that on Facebook. What kind of numbers did it end up putting down? Link to comment Share on other sites More sharing options...
Luis@OrtizPerformance Posted May 19, 2013 Report Share Posted May 19, 2013 No numbers. Customer wanted a street tune which is what I gave him. I live in a low income area so not many people can afford a dyno tune. However, F8L will be heading to the dyno soon Link to comment Share on other sites More sharing options...
PapaSmurf Posted May 19, 2013 Report Share Posted May 19, 2013 Yeah I've been eagerly awaiting his numbers lol. Also curious to see how the OPS 2 cams will perform. Link to comment Share on other sites More sharing options...
SniveTroll Posted May 22, 2013 Report Share Posted May 22, 2013 (edited) Wap block .020 decked .006Mmr stroker 850Ported pi heads milled .010Crower stage 2 cams. 62802-2 cams. RR intake Edited May 29, 2013 by SniveTroll Link to comment Share on other sites More sharing options...
iRoush Posted May 22, 2013 Author Report Share Posted May 22, 2013 Add info to your post foo! Link to comment Share on other sites More sharing options...
Schiffy Posted May 22, 2013 Report Share Posted May 22, 2013 Add info to your post foo!Forgive him, he's slow...Sent from my secretary!!! Link to comment Share on other sites More sharing options...
F8L GT Posted May 22, 2013 Report Share Posted May 22, 2013 (edited) http://www.youtube.com/watch?v=ST9gZzksUaUOPS1 cams, Flowtech long tubes, custom header back dumped before axle Edited May 22, 2013 by iRoush Link to comment Share on other sites More sharing options...
F8L GT Posted May 22, 2013 Report Share Posted May 22, 2013 No numbers. *Customer wanted a street tune which is what I gave him. *I live in a low income area so not many people can afford a dyno tune. *However, F8L will be heading to the dyno soon Yeah I've been eagerly awaiting his numbers lol. Also curious to see how the OPS 2 cams will perform.Once I can finally get ahead and be able to afford the 85$ for the dyno pulls I will go. Still trying to catch up from when my wife was on disability before the baby was born. Shit sucks Link to comment Share on other sites More sharing options...
Ford Motorsports Posted May 22, 2013 Report Share Posted May 22, 2013 Lovin all the cam videos! Link to comment Share on other sites More sharing options...
PapaSmurf Posted May 22, 2013 Report Share Posted May 22, 2013 Once I can finally get ahead and be able to afford the 85$ for the dyno pulls I will go. Still trying to catch up from when my wife was on disability before the baby was born. Shit sucksTrust me I totally understand about being broke. Shit does suck Link to comment Share on other sites More sharing options...
itsblown93 Posted May 24, 2013 Report Share Posted May 24, 2013 Our OPS1 Camshttp://www.youtube.com/watch?v=aj-ZEbLgSeQOPS1 CamsK&N intakeO/R x pipeSLP LM1 mufflersOrtiz 93 Tunespecs on these cams? Also are they a good nitrous cam? I'm looking for a good set of nitrous cams!! Link to comment Share on other sites More sharing options...
SniveTroll Posted May 29, 2013 Report Share Posted May 29, 2013 Updated for your viewing pleasureSent by smoke signals Link to comment Share on other sites More sharing options...
F8L GT Posted May 29, 2013 Report Share Posted May 29, 2013 specs on these cams? Also are they a good nitrous cam? I'm looking for a good set of nitrous cams!!226in/224ex .531lift 114LSA Link to comment Share on other sites More sharing options...
Luis@OrtizPerformance Posted June 6, 2013 Report Share Posted June 6, 2013 (edited) Since I thought F8L was really going to sell the car, I had a guy buy my Stage 2s at cost, only charged for installation and tuned him for free. Anyways, had the Stage 2s done and installed. He was supposed to go to the track tomorrow to get some numbers but with all the delays we had and what it now looks like his 14 year old lash adjusters couldn't handle the added lift/duration and one of them is now tapping, he can't go now since he is leaving back to Alaska to crab fish :ohwell: . At least now F8L is keeping his car and going forward . Anyways, our stage 2s. OPS2 CamsOrtiz TunedAiraid IntakeUDPsBBK LTsO/R X pipeFlowmaster 40sC&L Plenum75mm TB4.10s100 shot of nitrous Edited June 7, 2013 by Luis@OrtizPerformance Link to comment Share on other sites More sharing options...
Schiffy Posted June 6, 2013 Report Share Posted June 6, 2013 Saw the video on FB. Sounds good... I wanna see mikes numbers with the stage 1's. then if he goes stage 2's see those as well. I'm looking for the power gain. Haha... Sounds good though. Found a guy locally who does P&P work on the side and is highly recommended by pretty much everyone on the "757 mustangs" Facebook page. He'll do my heads for $300. Figure that, and some OPS2 cams, my 300rwhp goal will be easily attained.Tapatalk made me do it! Link to comment Share on other sites More sharing options...
PRPVinyl Posted June 6, 2013 Report Share Posted June 6, 2013 Yeah those OPS2 cams make a modular sound almost as good as a cammed pushrod motorSounds great Luis. So are there any plans for a stage 3 cammatt Link to comment Share on other sites More sharing options...
PapaSmurf Posted June 6, 2013 Report Share Posted June 6, 2013 Cams to make her dance!- - - Updated - - -Saw the video on FB. Sounds good... I wanna see mikes numbers with the stage 1's. then if he goes stage 2's see those as well. I'm looking for the power gain. Haha... Sounds good though. Found a guy locally who does P&P work on the side and is highly recommended by pretty much everyone on the "757 mustangs" Facebook page. He'll do my heads for $300. Figure that, and some OPS2 cams, my 300rwhp goal will be easily attained.Tapatalk made me do it!You will hit 300 easy. You need to hear my car. You will cream your panties lol. Link to comment Share on other sites More sharing options...
Luis@OrtizPerformance Posted June 6, 2013 Report Share Posted June 6, 2013 Yeah those OPS2 cams make a modular sound almost as good as a cammed pushrod motorSounds great Luis. So are there any plans for a stage 3 cammattThanks Matt. No plans for stage 3s since it'll be very hard to find someone with notched pistons. If I do, it'll be on my own engine and they will be new billets. Link to comment Share on other sites More sharing options...
Det_Riot Posted June 7, 2013 Report Share Posted June 7, 2013 Since I thought F8L was really going to sell the car, I had a guy buy my Stage 2s at cost, only charged for installation and tuned him for free. Anyways, had the Stage 2s done and installed. He was supposed to go to the track tomorrow to get some numbers but with all the delays we had and what it now looks like his 14 year old lash adjusters couldn't handle the added lift/duration and one of them is now tapping, he can't go now since he is leaving back to Alaska to crab fish :ohwell: . At least now F8L is keeping his car and going forward . Anyways, our stage 2s. OPS2 CamsOrtiz TunedAiraid IntakeUDPsBBK LTsO/R X pipeFlowmaster 40sC&L Plenum75mm TB100 shot of nitrousnom nom nom, time for you guys to start cutting 4v cams! and what kind of a homo puts balls on his mustang....smh Link to comment Share on other sites More sharing options...
Schiffy Posted June 7, 2013 Report Share Posted June 7, 2013 Cams to make her dance!- - - Updated - - -You will hit 300 easy. You need to hear my car. You will cream your panties lol.You got my number, and a fancy cell phone. I'm waiting on sound clip.Tapatalk made me do it! Link to comment Share on other sites More sharing options...
ShapeShifter Posted June 7, 2013 Report Share Posted June 7, 2013 no gears?sounds sweet btw! Link to comment Share on other sites More sharing options...
Luis@OrtizPerformance Posted June 7, 2013 Report Share Posted June 7, 2013 My bad, it has 4.10s Link to comment Share on other sites More sharing options...
ShapeShifter Posted June 8, 2013 Report Share Posted June 8, 2013 10-4!does it pull past 6k rpms? Link to comment Share on other sites More sharing options...
Luis@OrtizPerformance Posted June 8, 2013 Report Share Posted June 8, 2013 Fuck yes it does. Good lord it pulls HARDER than Edgars Gt. Link to comment Share on other sites More sharing options...
itsblown93 Posted June 8, 2013 Report Share Posted June 8, 2013 This guy here is looking for a set of cams if you'd like to sponser me lol. Keep up the good work Luis Link to comment Share on other sites More sharing options...
F8L GT Posted June 21, 2013 Report Share Posted June 21, 2013 http://www.youtube.com/watch?v=HiB-3fkhcmo&feature=youtu.be Link to comment Share on other sites More sharing options...
jgib4 Posted April 27, 2014 Report Share Posted April 27, 2014 This guy is now cammed Link to comment Share on other sites More sharing options...
SiK98GT Posted April 27, 2014 Report Share Posted April 27, 2014 I Should have my ops stage 2 cams next week. I can't wait to hear these bad boys lope...Sent from my SPH-L900 using Tapatalk 2 Link to comment Share on other sites More sharing options...
