Jump to content
Prokiller

January ROTM Winner - Prokiller

Recommended Posts

Now normally I'd write up some cheeky thing about the winner but it would be self serving this month.  so i'll just say thank you every one who nominated and voted for me.  I greatly appreciate all the love guys!  Also, thank you to everyone who voted and participated this month.

 

 

 

Engine:
-D.S.S. Super Pro Bullet 331 Stroker block with Series 20 upgrade
-Forged D.S.S. Pro-Lite Pistons
-Forged D.S.S. H-beam rods
-Cast Stroker Crank
-Felpro MLS head gaskets
-D.S.S. Windage Tray
-D.S.S. Main Support Girdle
-D.S.S. 7qt. Oil pan with FMS High Volume Oil Pump
-Vortech S-trim SQ-V2 (2.95" pulley)
-AFM Power Pipe
-AFR Competition 185 58cc heads
-Trick Flow Stud Mount 1.72 Roller Rockers
-Moroso fabricated aluminum valve covers w/ JIC fittings for breather
-Moroso breather tank w/ JIC fittings/lines
-AFM B-21 Cam (218/226 .542/.542 w/1.7 rocker 272/280 112 108)
-FRPP lifters
-Edelbrock Performer RPM intake
-1" phenolic intake spacer
-Stack Racing Polished 70mm Throttle Body
-Pro-M 80MM mass air w/ attached filter
-42lb FRPP Injectors
-Aeromotive Fuel Pressure Regulator
-PA Performance 130-amp Alternator
-BBK 1 5/8" ceramic coated long tube headers w/ Stage 8 locking header bolts
-Dr. Gas 2 1/2" x-pipe
-DynoMax race bullet mufflers
-Borla duul slant cut round intercooled exhaust tips for side exhaust
-255lph intank fuel pump
-T-Rex inline fuel pump
-MSD Pro-Billet Distributor
-MSD coil w/ Ford Motorsports 8mm wires
-MSD 6A Ignition system mounted in glove box
-Fluidyne Aluminum Radiator
-Manual Fan switch
-AFM PMS w/ boost controller
-Billet Smog Pump Delete (99.5" belt)
-Most wires hidden
-EGR Deleted

-A/C Deleted

Drivetrain:
-Tremec 3550 upgraded with 26-spline input shaft and larger output shaft
-Mcleod clutch
-Fidanza steel flywheel
-Maximum Motorsports Clutch Cable
-Steeda Double Clutch Quadrant
-AM Firewall Adjuster

-Lakewood poly trans mount

-Stifflers trans crossmember
-Pro 5.0 shifter
-Ford Motorsports Aluminum Driveshaft

-Steeda driveshaft spacer
-FRPP Driveshaft Safety Loop
-Ford Motorsports 3.73 gears
-Moser 28-spline axles
-Trick Flow Rear Stud Girdle

Suspension:
-Ford Racing Lowering Springs (I think C's)
-KYB Rear Shocks
-Vintage Venom GT500 brake conversion kit

-4-piston Brembo front calipers

-14" Brembo slotted front rotors

-Goodyear stainless lines

-Ford Racing cobra rear calipers

-slotted Brembo rear rotors

-J&M stainless lines
-Steeda Aluminum Lower Control Arms
-Steeda Adjustable Upper Control Arms
-Maximum Motorsports 4-bolt Caster/Camber Plates
-BBK Strut Tower Brace-Kenny Brown full length welded in subframe connectors
-2003 Cobra Rack (SPR-ZM)

Exterior:
-Fresh paint job :: Black with blue pearl, ghost blue pearl dual stripes
-Cobra R Hood w/ Hood Pins
-ABC Exclusives GTR front bumper smoothed on the sides
-Roush Side exhaust side skirts
-Saleen T1 race spoiler
-Export horizontal tail lights w/ amber turn signals
-Black Bullit fuel door
-Ultra Clear Headlights
-Ultra Clear Side Markers
-Clear Rear Reflectors

-19 x 8.5" TSW Gunmetal machined Nurburgring wheels

- 255/40-19 Mickey Thompson Street Comp tires

-20 x 10" TSW Gunmetal machined Nurburgring wheels
-305/35-20 Nitto NT555R drag radials
-Window Tint
-Painted Red Calipers w/ Pony Stickers
-Silver Bumper Inserts
-Painted Mirrors

-Rolled fenders

Interior:
-Painted Interior pieces
-White Face Gauges w/ LED light mod and red needles
-Sinus Industries Gauge Ring Bezel

-Amustangrocksleather center console cover
-White HVAC panel w/ LED light mod
-LED Reverse lights
-LED dome lights
-LED license plate lights
-Autometer 2 gauge pillar pod
-Autometer 2 gauge cluster pod
-Autometer 2 gauge clock pod converted for wideband
-Autometer C2 Boost, Water Temperature, Oil Pressure, Fuel Pressure gauges
-Autometer C2 Tachometer w/ UPR Tach Bracket
-AFM Uego 2000 wideband sensor (partially installed. Still have to hook up to Tach/PMS)
-Bullet Shifter Knob
-Billet Headlight Knob
-Billet Window Switches
-Billet Clothes Hangers
-Billet HVAC Contols
-Billet Cigeratte Lighter
-Billet E-Brake Handle
-Billet Door Lock Pins
-Billet Cruise Control Buttons
-AFM Billet Ash Tray Switch
-Neon Blue Lights under the dash
-JVC headunit
-Pioneer Tweeters
-Viper Alarm

 

IMG_0210_zps48ecb0b9.jpg

 

I realized that I have no pictures of my interior other than from 5 years ago....wow...so i'm going leave this here instead.

IMG_5337.jpg

 

null_zpsd12f0a4e.jpg

 

 

Link to comment
Share on other sites

i wanna see dan the sn masters top 5 sn's of all time list!! 

 

congrats ryan...i love the look you haave with that mustang. the black, the sick side skirts/exhust...the staggered wheels, the whole car is just simply badass dude.

Link to comment
Share on other sites

i wanna see dan the sn masters top 5 sn's of all time list!! 

 

congrats ryan...i love the look you haave with that mustang. the black, the sick side skirts/exhust...the staggered wheels, the whole car is just simply badass dude.

i'd almost be afraid of that list.  but then i'm pretty sure i can guess most of them.  question is, does that include new edges or not.  does give me a topic idea though.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


SN95 Source ©

The premier SN95 Community

×
×
  • Create New...